Xlite X1 Recess Mounted 2-in-1 Non-Maintained LED Emergency Lighting—an innovative solution complete with an integrated driver and LiFePO4 battery for Anti-panic lighting.
This cutting-edge product features a recessible disc designed to seamlessly fit into a ceiling cavity with a 75mm cutout.
For larger cutouts (up to 150mm), a supplied adapter disc can be interlocked to cover the space.
Using high quality Bridgelux SMD LED Chip, the Xlite X1 emits an ultra-bright source of illumination, strategically intended to alleviate panic and establish a safe, distinct, and efficient egress path during emergencies.
Enhanced with an upgraded optical system, the Xlite X1 aligns with European IEC60598 and AS/NZS2293.3 standards, meeting D50(268lm) standard.
The LiFePO4 3.2V 1.6Ah battery pack ensures over 3 hours of emergency load, providing steadfast illumination during power outages.
To better meet difference installation requirement for ceilling, Xlite X1 spit fire provides 3 colors of lamp housing White , Black , Grey .
Ideal for a wide range of internal general applications, including offices, shopping centers, commercial properties, and residential buildings, the Xlite X1 is the go-to choice for emergency lighting needs.
Choose the Xlite X1 to ensure safety and visibility in open areas during emergencies.
Relevant standard
IEC 60598-1:2014+A1:2017
IEC 60598-2-22:2014+A1:2017
AS/NZS60598.1:2017+A1:2017+A2:2020
AS 60598.2.22:2019
AS/NZS 2293.3:2018+A1:2021
Bodofor® LiFePO4 Battery Pack
4 years warranty
– Intelligent battery management technology via smart IC:
over-charge, over-current, short-circuit and deep discharge protection for battery.
DATASHEET
| Item | Part Number | X1M13W/ B | X1M23W/ B |
| Description | D40/D50 Recessed 2-in-1 LED Spit Fire Non-Maintained Emergency Light | ||
| Working | Mode of Operation | Non-Maintained | |
| Input | Voltage& Frequency | 220-240Vac , 50/60HZ | |
| Installation | Complete with 1 .2m 1ex cable & Ac plugs | ||
| Output | Light Source | Bridgelux SMD 1X5W | |
| Luminous Flux | 200lm±5% | 268lm±5% | |
| Power Consumption | 1 .3W | 1 . 6W | |
| Emergency Duration | > 180 minutes | ||
| Controls | Charger | 16hrs charging time with the latest temperature controlled BMS | |
| Emergency | Protection | Overcharge , low voltage disconnect , overcurrent , short circuit | |
| Testing Facility | Manual Test | ||
| Indicators | Battery charger green LED , Function failure through red LED. | ||
| Physical | Material | 850℃ Glow wire test Flame-retardant polycarbonate | |
| Mounting | Recessed-ceiling , 75-125mm cut-out | ||
| Finishing Color | White or black | ||
| Dimensions LxWxH | Disc:95mm/ 145mm diameter, Height:34mm | ||
| IP Rating | IP20 | ||
| Weight | 245g | ||
| Warranty | 5 years on product , 4 years on battery | ||
| Environment | Operating Temperature | 0° to 50° C | |
| Relative Humidity | 0 to 95% | ||
| Compliance | Standards | SAA/ RCM , IEC 60598-1 , IEC 60598-2-2 ,AS/NZS 2293 .3 | |
| AS/NZS 2293 Classification | C0 D40 , C90 D40 | C0 D50 , C90 D50 | |
| Accessories | Replaceable Battery | P/ N : 1116-01 | Bodofor® 18650 LiFe PO4 3 .2V 1600mA 01 | |
※ Central Battery Optional
Suitable for central battery applications that use a nominal AC or DC supply of 110V to 240V that includes a hold-of input toinhibit the LED driver output when a mains supply is connected.
Dimensions(Unit:mm)
